4th Qtr Quiz 1 MS 10
Quiz Summary
0 of 10 questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Incorrect
-
Question 1 of 10
1. Question
Is the removal of metal from the external surface of cylindrical workpieces using various types of cutter toolbits.
CorrectIncorrect -
Question 2 of 10
2. Question
The methods of cutting off a piece of stock while it is held in a lathe.
CorrectIncorrect -
Question 3 of 10
3. Question
Is the square finishing of the ends of the workpiece and is often used to bring the piece to a specified length.
CorrectIncorrect -
Question 4 of 10
4. Question
The process of making holes in a material using a drill bit.
CorrectIncorrect -
Question 5 of 10
5. Question
The process of checking the surface of a piece by rolling depressions into the surface.
CorrectIncorrect -
Question 6 of 10
6. Question
The process of enlarging and making accurate holes by means of an adjustable single point cutting tool.
CorrectIncorrect -
Question 7 of 10
7. Question
A lathe operation that may be performed upon a workpiece supported in a chuck, but the majority of workpieces turned on an engine lathe are turned between centers.
CorrectIncorrect -
Question 8 of 10
8. Question
The process of cutting internal treads by means of cutting tool called tap.
CorrectIncorrect -
Question 9 of 10
9. Question
A turning operation wherein a workpiece is machine to have two or more diameters in its length.
CorrectIncorrect -
Question 10 of 10
10. Question
The process of of turning a workpiece within 1/32 to 1/64 inch of its finished diameter.
CorrectIncorrect